9 Effective Ways – How to Replace the Belt on a Bissell Vacuum

“Once again, welcome to my “How to Replace the Belt on a Bissell Vacuum Cleaner” Blog. I will now explore a comprehensive guide about replacing the belt Bissell vacuum cleaner.”

When I published my last article about “how to fix Bissell vacuum suction,” many people asked me to post one more article about changing the Bissell vacuum belts. So, I’m here to solve your problems, and all of your issues about the Bissell vacuum cleaner will be solved here.

There are a lot of people who use Bissell vacuum cleaners right now. The Bissell vacuum cleaner is the best for your carpet cleaner and pet. There are different kinds of Bissell vacuum cleaners on the market, and there are a lot of tricks you can use to show off your vacuum cleaner. 

If your vacuum cleaner has suddenly gotten extra loud or the Vacuum suction has dropped and The vacuum is leaving a trail. Then you understand this time, you should change your belts. So, let’s go through the step-by-step guide on how to replace the Belt on a Bissell Vacuum.

How to Replace the Belt on a Bissell Vacuum: Step-By-Step

To replace the belt on a Bissell vacuum:

1. Gather a new belt, screwdriver, and scissors.
2. Ensure the vacuum is turned off and unplugged.
3. Remove the bottom plate and brush roll cover.
4. Slide off the old belt, noting its attachment points.
5. Install the new belt, ensuring it fits tightly around the motor shaft and brush roll.
6. Reassemble the vacuum, securing the brush roll cover with screws.
7. Regularly inspect and replace worn belts to maintain optimal vacuum performance.

Relevant Article

What is a vacuum belt?

A vacuum belt, also called a drive belt, is an integral part of vacuum cleaners. It links the motor to the brush roll or stirrer and transfers power to the brush roll to make it spin.

This spin helps remove dirt, trash, and pet hair from rugs and other surfaces by making them more accessible for the vacuum’s suction to pick up.

Regular use can wear out or break vacuum belts over time, so they must be replaced to keep cleaning as well as possible. For the best fit, use the right new Belt that came with the vacuum and follow the manufacturer’s directions. 

Understanding the Bissell Vacuum Cleaner Belt System

Before replacing a Bissell vacuum cleaner belt, you must understand how it works. The Belt links the motor shaft to the carpet cleaning-agitating brush roll that collects dirt.

The Belt turns the brush roll when the motor runs. Over time, the Belt may stretch, degrade, or break, reducing cleaning power or suction. 

Why does my vacuum belt break all the time?

When something strange gets into the vacuum and stops it from working, the vacuum belt usually breaks. In addition, normal wear and tear is the leading cause of breaking. 

Some things that could cause a vacuum belt to break are: 

  1. The normal wear and tear of use. 
  2. The brush roll has too much hair, lint, or string stuck in it. 
  3. If you catch the Belt on a floor or blanket, it might get too hot and break. 

If your vacuum belt is tearing, it could be because hair or lint is stuck in the brush roller. These should be checked for often on your brush roller so your Belt doesn’t worsen over time.

Using your vacuum, a lot can wear down the Belt over time, which is a common reason why vacuum belts break. It’s also possible that hair or lint is stuck on the brush roll, which makes the Belt get too hot and break.

How do I know if the Belt on my vacuum cleaner needs to be changed?

  • The vacuum you have is now making a lot more noise.
  • It’s no longer pulling as hard with the vacuum.
  • There is a mark from the vacuum.

Check your vacuum cleaner‘s spinning floor brush and drive Belt often for damage. If the Belt is broken or worn out, it must be changed. The drive belt is essential to your vacuum because it turns the brush roll, which picks up dust and dirt from your rugs.

The Belt might need to be changed if your vacuum isn’t washing as well as it is utilized to, or the brush roll won’t turn. There may be a rubber smell coming from your vacuum. Check the Belt for signs of wear.

When you change the Belt, please look at your user guide for recommendations on how to put it. Each vacuum belt should be changed every four to six months, depending on how often it is used and how well it was made.

How to Replace the Belt on a Bissell Vacuum – A Comprehensive Guide

Bissell vacuum Is the best for your home, and sometimes we identify problems with our vacuum cleaner.

It would help if you changed the Belt every four or six months to run your vacuum smoothly. So, let’s go with how to replace the Belt on a Bissell Vacuum.

1. Tools and Materials Needed

When you open your Bissell vacuum to change the Belt, you need some tools and materials. 

  • New Belt for your specific Bissell vacuum model
  • Screwdriver (typically Phillips-head)
  • Scissors or utility knife

Ensure you can get to these things before starting the repair process.  

2. Turned off and Unplugged.

Turned off and Unplugged

When you go to fix your vacuum cleaner or change your vacuum cleaner Belt, you must unplug and turn off your Bissell vacuum cleaner. 

It’s not just about Bissell vacuum cleaners; it’s also Dyson vacuum cleaners, Shark Vacuum CleanersUpright Vacuum cleaners, Wet & Dry Vacuum cleaners, or any vacuum cleaner. So keep it in mind. 

3. Prepare your spare vacuum belt.

It used to be that vacuum cleaner manufacturers would give you an extra belt when you bought a new one, but that’s not the case.

That means you’ll need to call the company that made the Belt or look for a replacement on their website.

They cost around $5, so you could buy two. Keep the model number of your vacuum close by because belts come in different sizes and thicknesses and can’t be switched out.

4. Remove the bottom plate.

Remove the bottom plate

Once the vacuum is disconnected, please put it on the ground so the bottom faces up.

Take off the bottom plate to see the vacuum cleaner belt and brush. Some plates are held in place with screws, while others use a quick-release latch. 

5. Removing the Brush Roll

Bissell vacuum Removing the Brush Roll

Get to the Belt by removing the vacuum cleaner‘s brush roll.

  1. Using a screwdriver, take out the screws that are holding the brush roll cover in place.
  2. Once the screws are removed, lift the brush roll cover and set it aside.

Now, you can pull out your brush roll using your hand. 

6. Accessing the Belt Area

After removing the brush roll cover, you can access the belt area. 

  • Locate the Belt and take note of its position and how it connects to the brush roll and motor shaft.
  • Take a picture or mentally note the Belt’s path for reference during reassembly if necessary.
  • Carefully lift the brush roll out of the vacuum cleaner, ensuring you don’t damage the bristles.

7. Detach the old Belt.

Bissell Vacuum old Belt

Now I’m sure you have access to the Belt area and a new belt to replace the old one. Follow these Steps carefully.

  1. Identify the Belt’s attachment points. One end will be connected to the brush roll and the other to the motor shaft.
  2. Release the tension on the Belt by pulling the brush roll away from the motor.
  3. Once the tension is dismissed, carefully slide the Belt off the brush roll and motor shaft.
  4. Check the old Belt for any indications of damage or wear. If it appears worn out or stretched, it’s time to replace it with a new one.

8. Installing the New Belt.

Bissell Vacuum new Belt

It would help to get the new Belt that fits your Bissell vacuum model. Put the Belt’s end over the motor shaft. Make sure that it fits firmly in the belt groove. 

Put the Belt’s other end over the brush roll. Check to see that it fits tightly around the spindle of the brush roll. 

Turn the brush roll by hand to ensure the Belt is lined up correctly and sitting on both the motor shaft and the brush roll.

9. Putting the vacuum back together

Bissell Vacuum cleaner

After changing the Belt, you have to put your Bissell vacuum back together again. 

Carefully put the brush roll back into the vacuum cleaner, ensuring it fits into the holes made for it. Make sure the brush roll is firmly in place and can turn quickly. 

Align the screw holes on the brush roll lid with the holes in the brush roll. Put the screws back in and tighten them with the screwdriver. This will hold the brush roll cover in place.

Now you can use your vacuum and hope your belt replacement is 100% successful and your vacuum runs perfectly. 

Advice and warnings (From Myself)

When you change the Belt on your Bissell vacuum, please remember these safety tips and advice: 

  • The user manual for your vacuum cleaner will have specific directions and pictures on how to change the Belt. 
  • Ensure that the new Belt you buy fits the type of your Bissell cleaner. 
  • When you handle the brush roll, be slow and gentle, so you don’t hurt the bristles. 
  • Inspect the Belt for indications of wear or bending regularly and replace it if necessary to keep cleaning at its best.

“Reader Engagement”

We appreciate your feedback and questions regarding the Bissell vacuum cleaner. If you have any thoughts or queries, please share them in the comments section below. If you found this manual useful, consider sharing it with your friends and family so they can effectively care for their Bissell vacuums. Happy cleaning!

Final Words

In this article, I will explain how to replace the Belt on the Bissell Vacuum cleaner. I hope You will understand all the things and you will benefit from it. On our website, the purpose is only home and kitchen improvement. So I hope you will be well in your personal life. Stay happy and stay with us. 


How often should I replace the belt on my Bissell vacuum?

Replacing the belt every 4 to 6 months is recommended to maintain optimal vacuum performance.

Where can I purchase replacement belts for my Bissell vacuum?

Replacement belts can be purchased directly from Bissell’s website, authorized retailers, or online marketplaces.

How do I know if the belt on my Bissell vacuum needs to be replaced?

Signs that the belt may need replacement include reduced suction power, a burning smell while vacuuming, or visible wear or damage on the belt itself.

Can I use any belt for my Bissell vacuum, or must it be specific to my model?

Using a belt specific to your Bissell vacuum model is essential to ensure proper fit and performance.

Are there any safety precautions I should take when replacing the belt on my Bissell vacuum?

Always ensure the vacuum is unplugged before beginning any maintenance, and refer to the user manual for specific instructions. Additionally, handle the brush roll and belt with care to avoid injury.

Leave a Comment