How to Fix a Henry Vacuum Cleaner: 5 Ways To Fix

“How to fix a Henry vacuum cleaner? It depends on your specific issue, but here’s a general guide to common problems and solutions.”

If you have a Henry vacuum cleaner, you already know Henry is a well-known and trusted brand.

There are many vacuum brands like Upright Vacuum, Dyson, Stick, Handheld, Hoover, Bissell, Robot, Moosoo, Stick, Master, and others.

But did you know that around 20,000 Henrys are sold in the UK every week, with over 10 million sold since its inception in 1981? Almost everyone, including me, has used this vacuum cleaner because of its guaranteed results.

I have used this vacuum cleaner for the last 5 years and know how to use it perfectly.

So when you use your vacuum cleaner for a long time, there will be problems because it’s a machine. Sometimes, it shows loss of suction, motor issues, brush bar not spinning, strange noises, leakage of dust or debris, overheating, and belt problems.

So, in this article, I will show you how to fix your Henry vacuum cleaner and, if you are facing another problem, how you can solve it yourself.

Relevant Article

• Are Henry Vacuum Cleaners Good?
• How to Use a Henry Vacuum Cleaner
• How to Empty a Henry Vacuum Cleaner
• How to Open a Henry Vacuum Cleaner

Tools You’ll Need

One day, when I cleaned my room, I noticed my Henry vacuum cleaner was not working properly. I didn’t know why.

I found my screwdriver and opened it myself. If you are facing this problem, then first of all, you need some tools to identify the issues and fix them yourself. 

• Screwdriver set
• Replacement filters
• Replacement belt
• Pliers
• Cleaning materials

How to Fix a Henry Vacuum Cleaner: Step-By-Step Guide

Finally, when I start to open my Henry vacuum cleaner, then I show It is held in place by seven screws. I will unscrew all these individually, then look up and check the power.

There are two power lines, positive and negative. When I checked, I identified these two power sources have power that is harmful to my vacuum cleaner.

At that time, I knew this problem was only for my vacuum belt. Then, I immediately changed my belt and checked it again. After, I saw that only the positive position had power.

Then I will reattach my vacuum cleaner and plug it in again, then start my vacuum, and it’s all done. My vacuum is fully okay.

Sometimes, it has many motor problems, so identify and solve them on your way. You can face more problems when you use your vacuum cleaner. 

1. Loss of Suction

Loss of suction is one of the most typical problems Henry vacuum owners have with their machines.

When the vacuum cleaner cannot efficiently take up dirt, it may be a difficult and stressful experience that slows the cleaning process. 

• Check the hose, wand, and floor tool for clogs and remove junk blocking the airflow. 
• Check the dust bag or bin out. If it is full, empty it or get a new one if necessary. 
• Look at the filter. If it’s dirty, clean it the way the maker says to, or get a new one if it’s worn out. 
• Ensure that all of the seals and gaskets are in good shape. Leaks can also lead to loss of suction. 

2. Brush Bar Not Rotating

If you have a Henry vacuum cleaner, an additional problem you could experience is that the brush bar does not rotate.

Because the brush bar is responsible for agitating carpet fibres, accumulating debris, or removing debris from a worn belt, a malfunction can considerably impact the vacuum cleaner’s operation. 

• Get rid of any hair or dirt wrapped around the brush bar. 
• Check the brush bar’s belt. You should get a new one if it’s broken or loose. 
• Make sure the brush bar is lined up correctly and in its housing.  

3. Strange noises

Sometimes, when working, I suddenly hear my vacuum create an unusual noise if you are working and hear any noises, a faulty or worn belt can make these unusual noises. And also, there are many causes to create these noises. 

• After unplugging the vacuum, check for clogs or damage on the brush bar, hoses and other moving components. 
• The brush bar or motor bearings may need to be returned due to wear and tear. 
• A high-pitched whining noise from the hoover might indicate a loose part or a motor issue.  

4. Power Issues

I will tell you before suddenly my vacuum doesn’t Turn On. Then, I checked all of these and fixed them myself. If your vacuum won’t turn on, try these to fix it. 

• Check the Outlet: Insert an additional item into an electrical socket to verify. If the outlet is damaged, connect the vacuum to another one.  
• Inspect the Cord: A damaged power cable may prevent a vacuum from operating. If the cable is broken or frayed, replace it.  
• Reset the Thermal Cut-off: The thermal cut-off may come on if the vacuum overheats. Find the reset button, often on the vacuum’s rear, and push it to reset it.  

5. Motor Overheating

Another problem with Henry vacuum cleaners is that the motor can get too hot. This can happen for several reasons, such as when the airflow is blocked or when the cleaner is used for a long time without stopping. 

• If the vacuum doesn’t work, look for damage to the power line. If it’s broken, it might need to be replaced. 
• Plug in another device to make sure the power outlet is working right. 
• Look at the switch or circuit breaker in your home’s electricity system.
• Check to see if there are any breathing blockages. If there are, the motor could get too hot. 
• If the filter is dirty, clean it or get a new one because a jammed filter can stop airflow and cause the heater to get too hot.
• If you use the vacuum and it gets too hot, give it time to cool down.

Maintenance Tips for Henry Vacuum Cleaner

If you want to prevent issues with your Henry vacuum cleaner, you must maintain it regularly. 

First, Clean the filters at least once a month to maintain optimal suction performance.

After that, Ensure the dust bag is emptied when it reaches full capacity to prevent loss of suction.

Lastly, Check the brush bar regularly for obstructions and clean it thoroughly to ensure smooth rotation.

Professional Repair Options

In this article, I will show you the method. If you are still unable to resolve your Henry vacuum cleaner by following the troubleshooting methods, it may be necessary to seek the assistance of a professional repair service specialist.

To receive assistance, you must contact an authorised service centre or a technician skilled in fixing Henry vacuum cleaners. 

Conclusion

In this article, I will show you how to fix a Henry vacuum cleaner and explain all issues, from small to big. You will benefit from it, and now you can fix your vacuum cleaner. 

If you want to know more about the Henry vacuum cleaners, like how to use, open, and empty them, then there is no problem. I will explain everything on my home and kitchen website. Also, for your convenience, I will link all of these to the beginning of the article “RELEVANT ARTICLE” Section. 

FAQs