Once again, I’m here to show you how to clean Bissell vacuum cleaners. If you have any type of vacuum cleaner, such as an Upright, Canister, Hoover, Henry, Central, Robot, Handheld, Moosoo, Wet&Dry, or any others, you should know how to clean it to keep your floors and carpets free from dirt, pet hair, and dust.
In the past few years, I’ve learned about different kinds of vacuum cleaners, and I have many problems cleaning and maintaining them; in this article, I will show you how to clean Bissell vacuum cleaners.
“How To Clean Bissell Vacuum Cleaner: Step-By-Step”
How to clean a Bissell vacuum effectively: gather all necessary cleaning tools, including a soft-bristle brush, microfiber cloth, mild detergent, water, and, optionally, compressed air. Begin by unplugging the vacuum and removing any attached accessories. Empty the dirt tank or bag and clean the filters thoroughly. Check for and remove any clogs from hoses and attachments, and clean the brush roll to ensure optimal performance. Wipe down the exterior, check belts for wear, and clean hoses and attachments. Reassemble the vacuum carefully, ensuring all parts are securely in place. Finally, store the vacuum in a dry, controlled environment to prolong its lifespan and maintain its performance.
Relevant Article
- How to Use Bissell Vacuum Effectively
- How to Fix Bissell Vacuum Suction
- Learn How to Replace the Belt on a Bissell Vacuum
- How to Empty Bissell Vacuum Cleaners
- Why is My Bissell Vacuum Blowing Air
- Bissell Crosswave Not Charging
Why it’s Important to Clean Bissell Vacuums
For many reasons, it’s important to clean your Bissell cleaner often. In the first place, it helps keep function at its best.
Over time, dust, dirt, and other small particles can build up inside the vacuum, blocking the filters and weakening the suction.
You can keep these problems from happening and ensure your vacuum keeps picking up dirt and trash from your floors by cleaning them regularly.
Proper care can also extend the life of your Bissell cleaner. Regularly cleaning the inside parts prevents them from wearing out too quickly, lowering the risk of technical breakdowns and expensive fixes. If you take good care of your vacuum, it will last for many years.
We’ve also covered a post on a similar topic, which you can find here
Why Is My Shark Vacuum Won’t Turn On
How to Clean Bissell Vacuum Cleaner | A Complete Guideline
Bissell is a well-known cleaning tool brand known for both quality and new ideas. Their vacuums are made to eliminate a wide range of dirt and hair quickly and effectively.
If you have a Bissell vacuum cleaner, you know how essential it is to keep it clean for optimal performance. Here are 11 effective ways to clean a Bissell vacuum cleaner. So, let’s start.
1. Gather Your Cleaning Tools
Before cleaning, let’s ensure you have all the necessary tools. The required things are as follows:
- Soft-bristle brush or toothbrush
- Microfiber cloth or sponge
- Mild detergent or Bissell-approved cleaning solution
- Water
- Compressed air can (optional)
2. Preparing the Vacuum Cleaner
I know many vacuum cleaners and families face this problem regularly. So, If you want to clean Your Bissell vacuum cleaner, then You must prepare your vacuum cleaner.
- Unplugged the vacuum from the power source to ensure safety and prevent potential accidents during the cleaning procedure.
- Remove any attached accessories or extensions from the vacuum cleaner, such as crevice tools or upholstery brushes, to facilitate thorough cleaning.
- Inspect the exterior of the vacuum for any visible dirt or debris, and use a soft, dry cloth to wipe down the surfaces. This simple step helps prevent dirt from transferring to your hands during cleaning and ensures a hygienic experience while handling the vacuum cleaner.
3. Empty the Dirt Tank or Bag
Suppose you prepare your vacuum. Sometimes, our vacuum only works properly if the dirt tank and the bag are free. So, to empty the dirt tank, You can follow these steps.
- Please remove it from the Bissell vacuum using the release button or unlocking mechanism.
- Dump the contents into a trash bin.
- For vacuums with disposable bags, remove the bag and dispose of it properly.
This step prevents buildup, ensuring optimal suction and performance during future cleanings.
4. Remove and Clean the Filters
Your Bissell cleaner may have multiple filters that collect dust and allergens. Remove the filters from the cleaner first so you can clean them.
If the filter can be washed, wash it lightly with warm water and mild dish soap. You don’t need to pass the HEPA filters in your vacuum. Instead, gently tap them to get rid of dust.
Let filters dry fully in the air before putting them back together to stop mould and mildew from growing.
5. Remove Clogs
To remove clogs, inspect the vacuum’s hoses, brush roll, and attachments for obstructions. Utilize a straightened wire hanger or a vacuum attachment to clear any debris hindering airflow.
This ensures optimal suction power and prevents damage to the vacuum. Regular checks for clogs maintain peak performance and prolong the vacuum’s lifespan.
Looking for more such informational blog topics? Read our recent blog post on
how to bench-bleed a master cylinder
6. Clean the Brush and Roll
The brush roll, or agitator, of your Bissell vacuum cleaner, removes dirt and debris from carpets and upholstery.
Brush rolls may get tangled with hair, thread, and other fibers, making them less efficient in agitating and cleaning. To maintain top performance, the brush roll must be regularly maintained.
Unplug the vacuum cleaner and access the brush roll assembly per the manufacturer’s directions to clean it. Cut and remove any tangled hair, fibers, or dirt surrounding the brush roll with scissors or a seam ripper after exposing it. Be careful not to damage the brush roll or bristles.
After removing the tangled debris, clean the brush roll with a moist cloth to remove any remaining dirt or grime. Clean the bristles and brush roll housing thoroughly to remove any obstacles affecting performance.
Check the brush roll for worn bristles or a loose belt. Replace worn or damaged parts to keep the brush roll and vacuum cleaner working well.
7. Wipe Down the Exterior
After cleaning the internal components:
- Wipe down the exterior surfaces of the vacuum cleaner with a damp cloth, covering the handle, body, and attachments.
- Ensure the fabric is wet, as excess moisture can damage electrical components.
- Wipe gently to remove dust and grime buildup.
- Avoid saturating the cloth or allowing water to seep into any openings.
This step keeps your vacuum looking fresh and prevents potential damage, ensuring its longevity and optimal performance.
8. Check Belts
Prevent the belts from signs of wear and tear on your Bissell vacuum, particularly if it has a belt-driven brush roll. Look for stretching, fraying, or any damage to the belt.
If you notice any of these signs, you must replace the belt promptly to maintain optimal performance. Ignoring a worn-out belt can lead to inefficient cleaning and potential damage to the vacuum’s motor.
Regularly inspecting and replacing belts as needed will help ensure your vacuum operates smoothly and effectively.
9. Cleaning the Hose and Attachments
The Bissell vacuum cleaner’s hose and attachments are vital for reaching tight places, upholstery, and other surfaces the main unit can’t go. Dirt, dust, and debris may build up on these parts, reducing their efficiency and cleanliness.
The hose and attachments of your Bissell vacuum cleaner must be cleaned regularly to preserve performance and flexibility.
Start by removing the vacuum cleaner’s hose and attachments according to the manufacturer’s instructions. Check the hose for clogs after removal. Use a long, flexible brush or a straightened wire hanger to remove dirt from the hose and keep it free.
Cleaning crevice tools, upholstery brushes, and dusting brushes using a moist cloth removes dust and filth. Make sure each attachment’s bristles and nooks are clean and debris-free.
To eliminate dust and grime from your Bissell vacuum cleaner’s detachable hose, rinse it with lukewarm water. Rinse and air-dry the hose before reconnecting it to the hoover. The hose should be completely dry to avoid mold and mildew from affecting the vacuum’s suction and air quality.
After cleaning and drying, ensure the vacuum hose and attachments fit snugly. Cleaning your Bissell vacuum cleaner’s hose and attachments regularly preserves their performance. It provides a comprehensive and efficient cleaning experience, enabling you to handle various cleaning jobs easily and accurately.
If you’re interested in knowing about more such informational blogs, then read our blog post on How to Empty Dyson Stick Vacuum
10. Reassembling the Vacuum Cleaner
Reassembling your Bissell vacuum cleaner after each cleaning activity ensures that all parts are firmly in place and ready for usage. Putting things back together, the Hoover properly provides its performance and avoids the chance of malfunctions or safety issues.
Refer to the user manual to reconnect each component firmly. Reinstall the dirt tank, filters, brush roll, hose, and attachments according to the manufacturer’s directions, paying attention to alignment and connection points.
Ensure the dirt tank is secured, the filters are seated, and the brush roll is aligned with the driving belt or motor spindle. Also, ensure the hoses and accessories are firmly attached to the vacuum cleaner and not hanging.
Once all parts are reassembled, check the hoover for proper placement. Pull the hose and attachments gently to verify they are securely connected, and visually inspect for loose or misaligned parts.
Please turn on the hoover before using it again to ensure it works. To maintain optimum suction and cleaning performance, listen for strange sounds or vibrations that may indicate faulty reassembly and test the hoover on various surfaces.
By carefully reassembling your Bissell vacuum cleaner after cleaning and maintenance, you can trust it to effectively clear dirt and debris.
11. Store Properly
If you want your Bissell vacuum to last as long as possible, keep it in a pure, dry area out of direct sunlight and wetness. Keeping the hoover in the right way protects it from damage and makes it last longer.
If you keep it in a controlled setting, it will continue to work well and its parts will not wear out too quickly. This easy step will help protect your investment and keep your Bissell vacuum working well for years.
Troubleshooting Common Issues
When fixing common problems with your Bissell vacuum, it’s important to do so immediately to get the best performance.
When the vacuum stops sucking, it’s usually because the brush roll, hose, or filters are clogged. This can be fixed by cleaning and checking them carefully.
Also, strange noises from the vacuum could mean blockages or broken parts that must be carefully checked out and replaced. Luckily, many problems can be fixed at home easily, like fixing up loose parts or putting grease on moving parts.
Reading the user instructions and calling customer service for help can also be very helpful when dealing with more complicated problems.
By keeping the vacuum clean and doing regular maintenance, you can avoid common issues and make it last longer, so it will keep cleaning well for years.
“Reader Engagement”
We appreciate your feedback and questions regarding the Bissell vacuum cleaner. If you have any thoughts or queries, please share them in the comments section below. If you found this manual useful, consider sharing it with your friends and family so they can effectively care for their Bissell vacuums. Happy cleaning!
Final Words About | How To Clean Bissell Vacuum
Okay, now you know how to clean Bissell Vacuum cleaners. This manual will greatly help you, and I will show you a step-by-step guide in this article.
Bissell vacuums are renowned for their efficiency and reliability in keeping our homes clean. So, take care of your vacuum cleaner to maintain its peak performance.
FAQs
It’s recommended to clean it after every few uses for optimal performance.
Yes, you can, but ensure they dry completely to prevent mold or mildew.
Check for clogs in the brush roll, hoses, and dirt bin.
Yes, if it shows signs of wear, like frayed bristles or reduced effectiveness.
Yes, but always follow the manufacturer’s guidelines and test on a small area first.
Store it upright in a cool, dry place, away from direct sunlight and moisture.
